Crestron
STX-1700C
2-Way RF Wireless Touchpanel
Typical Connection Diagram when Uploading a Project from the PRO2 or equivalent
NOTE:
If the control system in use has a 4-pin network connector rather than a
modular (RJ-11-type) NET connector, use an ST-CBL interface cable (sold
separately).
NOTE:
To make a cable for either configuration, refer to the “Programming Cable
Specifications” diagram after these notes.
NOTE:
An adapter such as a CN-RJ11 (sold separately) is required when using the
RJ-11 cable.
NOTE:
The RJ-11 (part of ST-PK) and ST-CBL cables can also be found as part
numbers CNSP-585 and CNSP-586, respectively, in the Crestron cable database. The
database can be downloaded from the Crestron website.
NOTE:
The procedure on the next page uses the ST-CBL.
Operations Guide - DOC. 6226A
2-Way RF Wireless Touchpanel: STX-1700C
•
21