Crestron
ST-COM
RS-232/422/485 COM Module
Configure ST-COM Program
SYMBOL
SYMBOL
DROP
ADDITIONAL
FOLDER
REQUIRED WHERE
SETUP
Device Library,
Control
Systems
Desired
control
system
System
Views
Refer to the documentation supplied
with the specific control system for
additional setup information.
Device Library,
Network
Control
Modules
ST-COM
System
Views,
Cresnet
Units
CHANGE NET ID (OPTIONAL) - Double-
click on ST-COM (or single-click then
right mouse-click) on ST-COM. Select
Configure. Select the NET ID tab to
display a window that allows for the
assignment of the appropriate ID.
COMMUNICATION PARAMETERS - In
the System Tree, scroll down to the Slot
9: Net-Device folder and expand to
display the two ports (A and B).
Single-click on a port, then right mouse-
click and select Configure. Select the
Serial Settings tab to display a window
that allows for the assignment of
communication parameters.
SIMPL is Crestron’s object-oriented programming language designated for easy
implementation of the control system requirements. The objects that are used in
SIMPL are called symbols.
ST-COM Symbol
The diagram after this paragraph shows the ST-COM symbol (Port A) in SIMPL
Windows. The symbol for Port B is identical. The tables that follow the diagram list
the inputs/outputs and their functional descriptions. Input and outputs surrounded by
brackets ([…]) are optional.
Detail View of the ST-COM Symbol in SIMPL Windows' Programming Manager
Operations Guide - DOC. 5695A
RS-232/422/485 COM Module: ST-COM
•
13
