RS-232/422/485 COM Module
Crestron
ST-COM
Select Firmware (UPG)
NOTE:
When the external power pack is disconnected from the ST-COM,
operating power automatically switches to Cresnet power supplied via the NET
connector(s). To remove power from the unit, make sure both the external power
pack and NET connector(s) are removed.
12. Remove operating power from the ST-COM, wait several seconds and
reconnect power.
13. Close the Viewport, exit SIMPL Windows or VT Pro-e, and disconnect
the programming cable from the PC and the control system.
Programming with SIMPL Windows
SIMPL (Symbol Intensive Master Programming Language) is an easy-to-use
programing language that is completely integrated and compatible with all Crestron
system hardware. The objects that are used in SIMPL are called symbols. SIMPL
Windows offers drag and drop functionality in a familiar Windows
environment.
SIMPL Windows is Crestron's software for programming Crestron control systems.
It provides a well-designed graphical environment with a number of workspaces
(i.e., windows) in which a programmer can select, configure, program, test, and
monitor a Crestron control system.
The nest two sections describe a ST-COM within SIMPL Windows. The first section
provides initial configuration information, the second section reviews the inputs and
outputs of the ST-COM symbol, and the third section provides the location of
example programs.
NOTE:
The following descriptions assume that the reader has knowledge of SIMPL
Windows. If not, refer to the extensive help information provided with the software.
Configure a ST-COM Program
To create a program with a ST-COM, refer to the table after this paragraph for initial
configuration information.
12
•
RS-232/422/485 COM Module: ST-COM
Operations Guide - DOC. 5695A
