DO
GUIDE
DO
Install the SSW
The SSW installs over a standard 1-gang U.S. electrical box. Use the following procedure to install
the SSW:
1. Once all cable connections have been made, use the two included 6-32 x 5/16" screws and
a Phillips screwdriver (not included) to attach the SSW rear assembly to the electrical box, as
shown in the following illustration.
NOTE
: For retrofit installations, the SSW can be installed over a 1-gang plaster ring using the
same installation method described above.
SSW-100/SSW-102
Room Availability Hallway Sign, Wall Mount
DO
Connect the SSW
The Crestron
®
SSW can be powered and controlled using one of the following connection methods:
•
USB:
Use the included USB cable to connect the SSW to a Crestron TSW-560, TSW-760, or
TSW-1060 touch screen. Connect the cable’s USB A connector to the touch screen and the
micro USB connector to the SSW rear assembly. Although the touch screen can be powered
using standard PoE (power over Ethernet), it must be powered using PoE+ to supply power to
the SSW over USB. Out-of-the-box functionality is established via the scheduling SmartObject
®
program with no programming required.
•
Cresnet
®
Network:
Use any standard Cresnet cable (not included) to connect the SSW to a
Crestron control system or DMPS device. The SSW is powered and controlled over Cresnet via
programming in SIMPL Windows or Crestron Studio
®
software.
NOTE
: The
CNET ID
button on the front of the assembly is used to identify the device on
the network using the Network Device Tree View in Crestron Toolbox™ software. For more
information, refer to the embedded Crestron Toolbox help file.
NOTE
: All cable connections must be made prior to installing the SSW.
NOTE
: Use Crestron power supplies for Crestron equipment.
DO
Check the Box
QTY PRODUCT
COLOR
PART NUM.
1
Bezel, Wall Sign
Clear
4525866
1
Cable, USB 2.0, A - micro B, 6’ (1.83 m)
2038114
2
Screw, 4-40 x 1/2", SEMS, Pan Head, Phillips
2011592
2
Screw, 6-32 x 5/16", Pan Head, Phillips
2007221
1
Sign, 8.0" x 5.25" x 0.5"
4525763
CNET (24 Y Z G):
To Cresnet
network device
USB (Micro):
To touch screen
Rear
assembly
1-gang U.S.
electrical
box
Screws (2):
6-32 x 5/16"