Crestron
QM-RMCRX-BA
QuickMedia™ Receiver/Processor
Mounting Positions of the Four Included Mounting Brackets
NOTE:
The MK-QM-RMCRX mounting kit is available for mounting the
QM-RMCRX-BA to a pipe.
Details can be found in the latest version of the
MK-QM-RMCRX Installation Guide (Doc. 6247).
Hardware Hookup
Refer to the following hookup diagram and, aside from attaching power last,
complete the connections in any order.
NOTE:
To prevent overheating, do not operate this product in an area that
exceeds the environmental temperature range listed in the specifications table.
Consideration must be given if installed in a closed or multi-unit rack assembly
since the operating ambient temperature of the rack environment may be greater
than the room ambient. Contact with thermal insulating materials should be
avoided on all sides of the unit.
NOTE:
The maximum continuous current from equipment under any external
load conditions shall not exceed a current limit that is suitable for the minimum
wire gauge used in interconnecting cables. The ratings on the connecting unit's
supply input should be considered to prevent overloading the wiring.
Operations Guide – DOC. 6332
QuickMedia™ Receiver/Processor: QM-RMCRX-BA
•
17
