Crestron
QM-MD16X16
16X16 QuickMedia™ Matrix Switcher
•
Additional QM-MD16X16 devices are assigned different Net ID numbers
as they are added.
•
If necessary, double click a device to open the “Device Settings” window
and change the Net ID, as shown in the following figure.
“QM-MD16X16 Device Settings” Window
•
The ID code specified in the SIMPL Windows program must match the Net
ID of each unit. Refer to “Identity Code” on page 13.
Program Manager
Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into
Detail
View
. Each signal in the symbol is described in the SIMPL Windows help file (
F1
).
Example Program
An example program for the QM-MD16X16 is available from the Crestron website
(
http://www.crestron.com/exampleprograms
Operations Guide – DOC. 6538A
16X16 QuickMedia™ Matrix Switcher: QM-MD16X16
•
19
