FlipTop Touchpanel Computer Center
Crestron
QM-FTCC-TPS4
Visual Representation of Gating Level, Clipping Level, Attack Time, and Decay Time
Clipping Level
Gating Level
Attack Time
Mic Off
TIME
SIGNAL LEVEL
Decay Time
Mic On
SIGNAL LEVEL
TIME
MICROPHONE
INPUT
SIGNAL
QM
OUTPUT
SIGNAL
Mic On
Attack Time
Decay Time
Mic Off
Gating Level Reached
Gating Level
Reached
Setting Microphone Gain
The QM-FTCC-TPS4 provides variable gain on the microphone inputs. The
following procedure is used to set the optimal gain for a microphone input.
Use the Realtime Mode in SystemBuilder to control phantom power, gain and gate
settings, and to monitor the gate, normal, and clip level indicators. For information
on using SystemBuilder software, refer to the extensive help information provided
with the software.
NOTE:
The input gain is independent of the system’s output volume level.
1. To adjust the input gain, set the gain and noise gate to their lowest settings.
Disable the “Mute” function by removing the check from the
Mute
checkbox.
2. Connect a microphone and enable phantom power if required.
30
•
FlipTop Touchpanel Computer Center: QM-FTCC-TPS4
Operations & Installation Guide - DOC. 6393
