manualshive.com logo in svg

Crestron Prodigy System, User Manual, Page: 134 / 144

Share
Download
Crestron Prodigy System User Manual Download Page 134

Prodigy

®

 System 

 

Crestron 

PAMP-4X100

 

Volume Control Mode 

The volume level of a connected room can be controlled when the room is in 
the 

Volume Control

 mode. To switch to the 

Volume Control

 mode: 

1.  Press and hold the 

ROOM

 button of the room to be controlled for two 

seconds. 

•

 Press 

j

 or 

k

 to change the volume in 1 dB increments. 

•

 Hold 

j

 or 

k

 for more than one second, to ramp the volume up 

or down in 1 dB/.1 second increments. 

If the maximum volume or minimum volume is reached, all front 
panel LED’s will blink three times. 

2. Press 

the 

ROOM

 button again to exit the 

Volume Control

 mode. 

If 

j

 or 

k

 is not pressed for 10 seconds, the PAMP-4X100 will 

automatically exit the 

Volume Control

 mode. 

128  

•

  Prodigy System: PMC2 

System User Guide – DOC. 7007B 

Summary of Contents for Prodigy System

















































































































































Reviews:

No comments