Crestron PC-350V Series, Product Manual

Page: 35 / 69

35 • PC-350V-12 and PC-350V-18 Product Manual — Doc. 9212A
3. Navigate to the CA file on the host computer.
4. Select the CA file, and then click Open.
5. Click Load to load the CA file to the power controller. The upload progress is shown in the
dialog box.
6. Once the power controller has completed the upload, click OK.
Delete Certificates
1. Click the corresponding certificate tab.
2. Click the trashcan button ( ) in the Actions column to delete the certificate.
3. Click Yes when prompted to delete the certificate or No to cancel the deletion.
Download Configuration
Click Download Configuration to save the power controller configuration settings. The
configuration files are downloaded in a compressed .tgz file. The saved configuration file can be
used to recover the power controller after a factory restore, configure the replacement unit, or
configure multiple units with same settings. For more information, see
Upload Configuration (on
the facing page) .
NOTE: Ensure the firmware versions of the old and replacement units are the same before
uploading the saved configuration to a replacement unit.