Crestron
MPS-300
Multimedia Presentation System 300
Ear Attachment for Rack Mounting
4.
Repeat procedure (steps 1 through 3) to attach the remaining ear to the
opposite side.
NOTE:
The sync input impedance and DDC feature should be set prior to placing
the MPS
ent rack. For more information, refer to “Configure the
-300 in an equipm
RGB Input Ports” on page 28.
Stacking
Four “feet” are located on the bottom of the MPS-300 so that if the unit is not rack
ounted, the rubber feet can provide stability when the unit is placed on a flat
okup
s as called out in the illustrations that follows this
iring” on page 22 before applying power. Apply
Hardware Connections for the MPS-3
m
surface or stacked.
Hardware Ho
Make the necessary connection
paragraph. Refer to “Network W
power after all connections have been made.
00, Front
COMPUTER:
TO USB PORT ON PC
Operations Guide – DOC. 6529B
Multimedia Presentation System 300: MPS-300
•
25
