Crestron ML-500, Programming Manual, Page: 23 / 30

Crestron ML-500 Mini LCD RF Wireless Handheld Remote
Labels for Page 1 of Favorites
Additions and/or changes to the label names are made on the right side of the
window. After all additions and changes have been made, click
Save Labels .
NOTE: All labels are automatically capitalized. Lower-case letters cannot be
entered. The maximum label size is one line by five characters wide.
When assigning labels to Favorites, page flips can also be assigned. Select a
destination page by choosing a page from the drop-down menu next to each label.
PROGRAMMING TIP:
Use page flips from a Favorite button press to jump to a relevant page. Using the
previous screen as an example, pressing MOVIE, can send a command to the control
system to dim lights, set the audio volume and turn on the DVD player. At the same
time, the remote display will jump to the first page of the DVD Grp group for further
control of the DVD player.
To delete all of the labels on a page, click Clear Labels .
After the Grp groups, labels, and page flips have been created, click OK and compile
the project for uploading to the ML-500 (
File | Compile Project… or F12 ).
Uploading
Once a project has been created and compiled, it can be loaded into the ML-500
using the supplied cable (Crestron cable number 2010129).
Before loading a compiled VT Pro-e project, the serial cable supplied with the
ML-500 must be connected to the interface port on the side of the ML-500 and a
PC’s serial port as shown in the following diagram.
Programming Guide – DOC. 6263 Mini LCD RF Wireless Handheld Remote: ML-500
•
19