manualshive.com logo in svg

Crestron ML-500, Programming Manual, Page: 10 / 30

Share
Download
Crestron ML-500 Programming Manual Download Page 10

Mini LCD RF Wireless Handheld Remote 

Crestron 

ML-500

 

Adding an ML-500 to a system requires SIMPL Windows to program an ML-500 
into a control system program and Vision Tools Pro-e to create soft key labels, Grp 
group names, and page flips from the Favorites list. 

Earliest Version Software Requirements for the PC 

NOTE:

  Crestron recommends that you use the latest software to take advantage of 

the most recently released features. The latest software is available from the 
Downloads | Software Updates section of the Crestron website (www.crestron.com). 

The following are the earliest useable software version requirements for the PC: 

• 

SIMPL Windows version 2.05.17 or later with library update file 276. 
Requires SIMPL+® Cross Compiler version 1.1. 

• 

Crestron Database version 16.1.3 or later. Required by SIMPL 
Windows. 

• 

VisionTools Pro-e (VT Pro-e) version 3.2.1.0 or later. For creating soft 
key labels, Grp group names, and page flips from Favorites list. 

Programming with SIMPL Windows 

NOTE

: The following are acceptable file extensions for programs that include a 

ML-500, developed for specific control system types: 
 .smw: 

 

projectname

.smw (SIMPL Windows source file) 

 .spz: 

 

projectname

.spz (compiled file for 2-series) 

 .bin: 

 

projectname

.bin (compiled file for CNX generation) 

 .csz: 

 

projectname

.csz (compiled file for CNX generation with SIMPL+) 

 .ush: 

 

projectname

.ush (compiled file for CNX generation w/ SIMPL+ header file) 

 .usp: 

 

projectname

.usp (source code module for SIMPL+) 

 .umc: 

 

projectname

.umc (user macro for SIMPL) 

SIMPL Windows is Crestron's software for programming Crestron control systems. 
It provides a well-designed graphical environment with a number of workspaces 
(i.e., windows) in which a programmer can select, configure, program, test, and 
monitor a Crestron control system. SIMPL Windows offers drag and drop 
functionality in a familiar Windows

®

 environment.  

NOTE:

  The following assumes that the reader has knowledge of SIMPL Windows. 

If not, refer to the extensive help information provided with the software.  

NOTE:

  In the following, the PRO2 control system is used. 

This section describes a sample SIMPL Windows program that includes an  
ML-500 remote control. 

Configuration Manager is where programmers “build” a Crestron control system by 
selecting hardware from the 

Device Library

. In Configuration Manager, drag the 

PRO2 from the Control Systems

 

folder of the 

Device Library

 and drop it in the upper 

pane of the 

System Views

. The PRO2 with its associated communication ports is 

displayed in the 

System Views

 

upper pane.  

6  

•

  Mini LCD RF Wireless Handheld Remote: ML-500 

Programming Guide – DOC. 6263 

Summary of Contents for ML-500































Reviews:

No comments