32
•
CCS-UC-1: Crestron Mercury Tabletop Conference System
Product Manual – DOC. 7844M
APPSPACE
The CCS-UC-1 can display content from an Appspace account when the device is not in
use (determined by the built-in occupancy sensor).
NOTES:
•
An active Appspace account is required.
•
Appspace video service is not supported.
•
To use Appspace when the device is in Standby, the Power Settings must be set
to “Occupancy Based With Signage” as described in “Power Settings” on page
Click APPSPACE to configure the device’s operation with the Appspace platform.
APPSPACE Screen
To configure the device for use with Appspace:
1.
Set Appspace Integration to Enabled to enable Appspace when the CCS-UC-1
goes to sleep based on occupancy (Standby). When enabled, the display on the
CCS-UC-1 turns off and the connected display will show Appspace content.
NOTE:
To use Appspace when the device is in Standby, the Power Settings must
be set to “Occupancy Based With Signage” as described in “Power Settings” on
page 35.
2.
Choose the Account Location.
−
Public Cloud: Select this option to use the Appspace public web app.
−
Private Instance: Select this option to use a privately hosted instance of the
Appspace web app.
3.
Enter the Appspace App URL. This is the URL where a privately hosted instance
of the Appspace web app can be found. Leave blank if the Public Cloud account
location is selected.