manualshive.com logo in svg

Crestron Isys TPS-6L, Operations & Installation Manual, Page: 48 / 56

Share
Download
Crestron Isys TPS-6L Operations & Installation Manual Download Page 48

Isys

® 

5.7” Wall Mount Touchpanel   

Crestron 

TPS-6L

 

• 

Use the Address Book in the Crestron Toolbox to create an entry for the 
TPS-6L with the TPS-6L’s TCP/IP communication parameters. 

• 

Display the “System Info” window (click the 

 icon) and select the  

TPS-6L entry. 

Programs, Projects and Firmware 

Program, project or firmware files may be distributed from programmers to installers 
or from Crestron to dealers. Firmware upgrades are available from the Crestron 
website as new features are developed after product releases. One has the option to 
upload programs and projects via the programming software or to upload and 
upgrade via the Crestron Toolbox. For details on uploading and upgrading, refer to 
the SIMPL Windows help file, VisionTools Pro-e help file or the Crestron Toolbox 
help file. 

SIMPL Windows 

If a SIMPL Windows program is provided, it can be uploaded to the control system 
using SIMPL Windows or Crestron Toolbox. 

VisionTools Pro-e 

Upload the VisionTools Pro-e file to the touchpanel using VisionTools Pro-e or 
Crestron Toolbox.  

Firmware 

Check the Crestron website to find the latest firmware. (New users may be required 
to register to obtain access to certain areas of the site, including the FTP site.) 

• 

Upgrade TPS-6L firmware via Crestron Toolbox. 

• 

Establish communication with the TPS-6L and display the “System Info” 
window. 

• 

Select 

Functions | Firmware…

 to upgrade the TPS-6L firmware. 

Program Checks 

Actions that can be performed on the TPS-6L vary depending on whether it is 
connected via Cresnet or Ethernet. 

Cresnet Connections 

For Cresnet connections, using Crestron Toolbox, display the network device tree 
(

Tools | Network Device Tree

) to show all network devices connected to the control 

system. Right-click on the TPS-6L to display actions that can be performed on the 
TPS-6L. 

Ethernet Connections 

For Ethernet connections, display the “System Info window (click the 

 icon) and 

select the 

Functions

 menu to display actions that can be performed on the TPS-6L. 

Be sure to use the Crestron Toolbox to create the TPS-6L IP table. 

• 

Select Functions | IP Table Setup. 

• 

Add, modify or delete entries in the IP table. The TPS-6L can have only one 
IP table entry. 

• 

A defined IP table can be saved to a file or sent to the device. 

Edit the control system’s IP table to include an entry for the TPS-6L. The entry 
should list the TPS-6L’s IP ID (specified on the TPS-6L’s IP table) and the internal 
gateway IP address 127.0.0.1. 

44  

•

  Isys

®

 5.7” Wall Mount Touchpanel: TPS-6L   

Operations & Installation Guide - DOC. 6630A 

Summary of Contents for Isys TPS-6L

























































Reviews:

No comments