Touchpanel Media Centers
Crestron Isys i/O
™
TPMC-15/17 Tilt Series
Select the following
Test Patterns,
in the following order, and adjust the display as
necessary.
1. Vertical
Lines
2. Grid
3. Color
Bars
4. Grayscale
Gradient
5. Frequency
Adjust
Test
6. Streak
Test
7. Skew
Test
8. RGB
Gradient
Select Project
Permits the selection of the touchpanel program, a .vtz file. The default file location
is the internal flash. To select a project from the internal flash, select
Browse
and
select the compiled project to be loaded.
If loading an external file, check
External
as the
Project Working Path
and use the
Select
button to select the network drive and/or flash drive where the compiled
project is located. After selecting the location of the compiled project, select
Browse
to find the compiled project file.
NOTE:
Selecting the
External
option permits you to connect to a network drive,
USB devices, and the PC Card ports on the rear of the TPMC-15 or TPMC-17.
NOTE:
If
External
is checked, the display list cannot be viewed via Crestron
Toolbox.
After the compiled project has been selected, press
Load
to load the project to the
touchpanel.
“Select Project” Window – Project to Load
RGB Video
Each one of the RGB (QM versions only) and video inputs is selected and adjusted
from this window. Click on an input tab and adjust the settings for the selected input.
32
•
Touchpanel Media Centers: Crestron Isys i/O™ TPMC-15/17 Tilt Series Operations
Guide - DOC. 6344
