Crestron
IM-TCCV
iMedia Table Mount Computer Center with Video
b. Install the left and right brackets using the cover screws as shown in the
following diagram.
Install Brackets
2. Use a drill/driver to install four #6 hardware screws (not supplied) in the top
holes of the brackets to secure the unit to the underside of the mounting
surface.
Install Hardware Screws
MOUNTING SURFACE
#6 HARDWARE SCREWS (x4)
NOTE:
Do not over-tighten the screws as this may damage the surface
and/or the unit.
Hardware Hookup
Ventilation
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the table of specifications. Consideration
must be given if installed in a closed or multi-unit rack assembly since the operating
ambient temperature of the rack environment may be greater than the room ambient.
Contact with thermal insulating materials should be avoided on all sides of the unit.
Connect the Device
Make the necessary connections as called out in the illustrations that follow this
paragraph. Turn on the system only after all connections have been made.
Hardware Connections for the IM-TCCV (Rear)
TO IM-RXV RECEIVER:
CONNECT TO IMEDIA
RECEIVER
GROUND
Operations & Installation Guide – DOC. 6481
iMedia Table Mount Computer Center w/Video: IM-TCCV
•
11
