Supplemental Guide – DOC. 7797D
DM Lite HD(I)-MD Auto-Switchers and Extenders
•
11
2.
Enable or disable automatic routing of the local and remote inputs by clicking the
appropriate Auto Route radio button:
•
To enable automatic routing, click the TRUE radio button (default setting).
•
To disable automatic routing, click the FALSE radio button.
3.
In the text entry boxes of the Output, Local Inputs, and Remote Transmitter
sections, rename the output and inputs if desired, and then click Save Name.
NOTE:
The Output section displays the resolution and frame rate being
transmitted to the output.
4.
To manually route a local or remote input to the output, select the corresponding
input radio button. The input is routed to the output.
To manually disconnect the route of a local or remote input, click the <clear Route> radio
button in the Local Inputs section of the page.
Configure Input Settings
The web interface allows the desired EDID to be selected and sent to the inputs. Three
built-in EDID files are available for selection, and a custom EDID file can also be selected.
The EDID can be selected on a global basis and sent to all inputs, or it can be selected on
an individual basis for each input. In addition, inputs can be renamed. HDCP support can
also be enabled or disabled for each input on an individual basis. The routing priority level
of inputs can also be set. For the HD-MD-400-C-E only, TT-100 support can also be
configured.
To configure inputs:
1.
In the navigation bar, click INPUTS. The Inputs page opens.
