Product Manual — Doc. 7389C
GL-IPAC-SW8 • 34
2. Select Next to assign loads to the button.
Select Btn Type Screen
The Select Loads screen appears. If a button is set to On, Off, Toggle, or Custom, the loads
affected by the button press must be selected. Affected loads have the function displayed
next to the load ID. Unaffected loads have - - - displayed next to the load ID.
l
Press Adjust to change functions.
l
Set All selects all loads.
l
Clr All clears the functions of all loads.
Select Loads Screen
Remote Keypads
Remote Keypads configures keypads connected to external systems via IP.
To program or edit remote keypads that operate with a connected control system, select
Remote Keypads from the Setup screen. The GL-IPAC-SW8 allows for up to two remote
keypads to be connected to ID 20 and 21 on the remote control system.
Refer to the steps described above in the Keypads section to program button functions for
remote keypads.
To configure the remote keypad:
1. Press Setup on the Keypad Address Setting screen.
Rmte Keypd List Screen
2. Enter the IP address of the remote control system.
3. Press Edit and then use ▼ and ▲ to change the IP values.
4. Press ENTER to advance to the next part (octet) of the IP address.
