background image

 

This document was prepared and written by the Technical Documentation department at: 

 

 

Crestron Electronics, Inc. 

15 Volvo Drive 

Rockleigh, NJ 07647 

1-888-CRESTRON 

 

 
 

Regulatory Compliance

Federal Communications Commission (FCC) Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Industry Canada (IC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:

(1) This device may not cause harmful interference and (2) this device must accept any interference received, 

including interference that may cause undesired operation.

CAUTION:

  Changes or modifications not expressly approved by the manufacturer responsible for compliance 

could void the user’s authority to operate the equipment. 

NOTE:

  This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help

As of the date of manufacture, the FTI-PWR-D-B and FTI-PWR-D-BALUM have been tested and found to 

comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance 

Labelling.

 

 

 

 

All brand names, product names and trademarks are the property of their respective owners. 

©2010 Crestron Electronics, Inc. 

 

Summary of Contents for FTI-PWR-D





















Reviews: