Partner: Wolf
V
ision
Model: Eye-12
/14
,
VZ-
3
/3s
/
8light
4
/8plus
4
/
xNEO
/
9P³/
9.4
L/9.4F
/C3D
/C6/C12
3
/C32
3
Device Type: Document Camera
GENERAL INFORMATION
SIMPLWINDOWS NAME:
WolfVision
WolfProt
TCP-IP v1.
2
CATEGORY:
Camera
VERSION:
1.
2
SUMMARY:
This module provides TCP-IP control of the WolfVision Document Cameras.
GENERAL NOTES:
This module provides TCP-IP control of the WolfVision Eye-12 and VZ-9.4F. It should
also control the
EYE-14, the
VZ-3/3s,
VZ-8
light
4
/plus
4
,
VZ-9
plus
with serial number
#1008068 and higher
, VZ-9plus
3
, VZ-9.4L, VZ-xNEO
,
VZ-C6, C3D,
VZ-C12
²
with
serial number #1009412, VZ-C32 with serial number #1011797 and higher
, VZ-
C12
3
and VZ-32
3
. Some commands
are
not be available on all models.
CRESTRON HARDWARE REQUIRED:
2 or 3-Series Processor with Ethernet
SETUP OF CRESTRON HARDWARE:
TCP/IP
Port Number: 50915
VENDOR FIRMWARE:
N/A
VENDOR SETUP:
None
CABLE DIAGRAM:
Ethernet
CONTROL:
Power_On/Off/Toggle
D
Pulse to turn the document camera on and off.
Zoom_<Wide/Tele>
D
Press and hold to adjust the camera’s zoom. Once zoomed all the way in, releasing
and pressing the Zoom_Tele again will cause the camera to zoom in farther using
the digital zoom.
Focus_<Near/Far>
D
Press and hold to adjust the camera’s focus.
Auto_Focus_<On/Off/Toggle>
D
Pulse to turn the auto focus on and off.
Iris_<Open/Close>
D
Press and hold to adjust the camera’s iris.
Auto_Iris_<On/Off/Toggle>
D
Pulse to turn the auto iris on and off.
Iris_Priority_<Auto/Manual/Toggle>
D
Pulse to set the iris priority to auto or manual.
Image_Rotation_Off
D
Pulse to turn the image rotation off.