Docking Stations
Crestron
TPS-6X-DS & TPS-6XNL-DS
Setup
Hardware Hookup
The only connection to the TPS-6X-DS is via the fixed cable, which is connected to
the
TO PANEL
port on the (included) TPS-6X-IMCW Interface Module.
When connecting the TPS-6X-DS, consider the following:
•
Use Crestron
®
power supplies for Crestron equipment.
•
The included cable cannot be extended.
Hardware Connection for the TPS-6X-DS
To
TO PANEL
Connector on
TPS-6X-IMCW
NOTE:
The length of the connecting cable on the TPS-6X-DS is 9 feet (2.75
meters). The length of the cable has been shortened for illustrative purposes in the
diagram above.
Recommended Cleaning
The TPS-6X-DS comes in a soft microfiber bag to protect it during shipping. This
can be used to clean the docking station.
6
•
Docking Stations for the TPS-6X Series: TPS-6X-DS & TPS-6XNL-DS
Operations Guide – DOC. 6876B
