Product Manual — Doc. 8918B
DM-NVX-E760 and DM-NVX-E760C • 1
Introduction
Crestron® DM NVX® network AV encoders/decoders transport ultra high-definition 4K video with
60 Hz frame rates and 4:4:4 color sampling over standard Gigabit Ethernet. Using Pixel Perfect
Processing technology, a video signal is encoded and then decoded to achieve imperceptible end-
to-end latency of less than 1 frame.
The DM-NVX-E760 and DM-NVX-E760C are designed to function as encoders only. The devices
include a DM® input for interoperability with DM 8G+® output devices and DM Lite® transmitters.
Certified using HDBaseT® technology, the DM input is also compatible with third-party HDBaseT
products. The DM-NVX-E760 and DM-NVX-E760C enable AV signals from the DM input to be
transmitted over the network to one or many DM NVX decoders.
The DM-NVX-E760 is a surface-mountable endpoint designed to mount onto a flat surface or
rack rail. The DM-NVX-E760C is designed for installation into a card slot of a DMF-CI-8 card
chassis.
This manual provides information about the following:
l
Physical Description (on the next page)
l
Status and Configuration (on page 7)
l
In addition, information about device discovery of a DM NVX device using Crestron Toolbox™
software is provided in the appendix of this manual. For installation information, refer to the
(Doc. 8211) or
(Doc. 8346) as
appropriate. For information about designing a DM NVX system, refer to the
(Doc. 7977).
