32 • DM-NVX-E760 and DM-NVX-E760C
Product Manual — Doc. 8918B
Edit Input Pop-Up Page
Using SIMPL Windows
Configure the DM input in Slot-10: DM In. Set the <Name> serial input join to the desired input
name. Set the <HdcpReceiverCapability> and <DMInputType> analog input joins to the desired
values. For additional information, refer to the SIMPL Windows help file.
Still Image Detection
Still image detection enables the DM-NVX-E760(C) endpoint to detect a still image and pass the
information to a control system. Still image detection occurs when a sync is detected at the DM
input and 5 seconds have elapsed in which no motion occurred within the image.
Still image detection is reported in the top-level programming slot of SIMPL Windows via the
<StillImageDetection_F> analog output join.
