30 • DM-NVX-D30/E30(C)
Web Interface Configuration Guide — Doc. 8874D
Create New Local User
1. Click the Create User button in the User tab.
2. In the Create User dialog enter the following.
Create User Dialog Box
l
Enter a user name in the Name field. A valid user name can consist of alphanumeric
characters (letters a-z, A-Z, numbers 0-9) and the underscore “_” character.
l
Enter a password in the Password field; reenter the same password in the Confirm
Password field.
l
Assign the access level by selecting one or more groups from the Groups drop-down
list.
l
Make sure that the Active Directory User slider is set to Off.
3. Click OK to save. Click Cancel to cancel the changes.
Add Active Directory User
Users cannot be created or removed from the Active Directory server, but access can be granted
to an existing user in the Active Directory server.
To grant access to an Active Directory user, you can either add the user to a local group on the
DM-NVX-D30/E30(C), or add the Active Directory group(s) that they are a member of to the
DM-NVX-D30/E30(C) (see the
Add Active Directory Group (on page 34)
topic for more
information).
To add an Active Directory user:
