Product Manual — Doc. 9219A
DM NVX® 4K60 4:2:0 Network AV Encoders and Decoders • 101
Managing Group Authentication
Groups are used to group users based on access level and Active Directory credential
management settings. Click the Groups tab to view information about all groups, to delete a
group, or to add a group.
Security Tab, Groups Tab
The Groups tab provides a table that displays the following information about each group:
l
Group Name: Indicates the name of the group. Default group names are Administrators,
Connects, Operators, Programmers, and Users.
l
AD Group: Indicates whether the group is authenticated using Active Directory credential
management: Yes or No
l
Access Level: Indicates the access level of the group: Administrator, Connect, Operator,
Programmer, or User.
By default, up to 10 groups can be displayed in the table simultaneously. To change the default
setting, select the desired number in the drop-down list at the bottom of the table. The number
of groups can be set to 5, 10 (default setting), or 20. If the number of groups exceeds the number
to be displayed simultaneously, do either of the following to locate additional groups:
l
Use the Search box above the table.
l
Use the scroll arrows at the bottom of the table to navigate through the list of groups.
