Crestron DM-NVX-352, Interface Manual

Page: 31 / 85

Web Interface Guide — Doc. DM-NVX-352(C) • 25
Routing
The Routing page can be used to enable or disable automatic routing between video inputs, to
select and combine separate video and audio signals from two different inputs, or configure
analog audio as either an input or an output.
The Routing page can be accessed at any time by simply clicking the ROUTING tab in the
navigation bar of the web-based user interface of the DM-NVX-352(C).
The Routing page displays different sections and parameters depending on the mode of the DM-
NVX-352(C).
Input Routing:
Move the Automatic Input Routing slider to Enabled or Disabled to enable or disable the automatic
routing of video inputs. When automatic input routing is enabled, the DM-NVX-352(C) will
automatically route the last connected input.
Select an audio source from the Audio Source drop-down list and video source from the Video
Source drop-down list if you wish to combine separate video and audio signals from two different
inputs.
The Active Audio Source field displays read-only information about the active audio source.
The Active Video Source field displays read-only information about the active video source which
can differ from the option selected in the Video Source drop-down due to automatic routing.
Select the audio source for the Dante/AES-67 output from the Dante/AES-67 Transmit Audio