Crestron DM Lite 4K60, Product Manual

Page: 33 / 82

Product Manual — Doc. 9259A DM Lite® 4K60 4:4:4 Extenders • 29
Power Connection
Be aware of the following guidelines regarding the power connection for a surface-mountable
transmitter , surface-mountable receiver , wall plate transmitter , and wall plate receiver .
Surface-Mountable Transmitter Power Connection
A 24VDC power pack is included with a surface-mountable DM Lite transmitter. Be aware of the
following:
l
When a surface-mountable DM Lite transmitter is paired with a surface-mountable DM
Lite receiver, either the power pack included with the transmitter or the receiver can be
used to power both devices. Power is transmitted over the CATx cable that connects the
surface-mountable transmitter to the surface-mountable receiver. A power pack must not
be connected to both devices simultaneously.
l
When a surface-mountable DM Lite transmitter is paired with a wall plate DM Lite
receiver, the power pack included with the transmitter is used to power both devices.
Power is transmitted over the CATx cable that connects the surface-mountable
transmitter to the wall plate receiver.
l
When a surface-mountable DM Lite transmitter is paired with a DMPS Lite switcher, the
switcher provides power to the transmitter. Power is transmitted over the CATx cable
that connects the surface-mountable transmitter to the switcher. The transmitter must
not be connected to the included power pack.
Surface-Mountable Receiver Power Connection
A 24VDC power pack is included with a surface-mountable DM Lite receiver. Be aware of the
following:
l
When a surface-mountable DM Lite receiver is paired with a surface-mountable DM Lite
transmitter, either the power pack included with the receiver or the transmitter can be
used to power both devices. Power is transmitted over the CATx cable that connects the
surface-mountable receiver to the surface-mountable transmitter. A power pack must not
be connected to both devices simultaneously.
l
When a surface-mountable DM Lite receiver is paired with a wall plate DM Lite
transmitter, the power pack included with the receiver is used to power both devices.
Power is transmitted over the CATx cable that connects the surface-mountable receiver to
the wall plate transmitter.
l
When a surface-mountable DM Lite receiver is paired with a DMPS Lite switcher, the
switcher provides power to the receiver. Power is transmitted over the CATx cable that
connects the surface-mountable receiver to the switcher. The receiver must not be
connected to the included power pack.