manualshive.com logo in svg

Crestron DigitalMedia DM-MD64X64, Operations & Installation Manual, Page: 36 / 60

Share
Download
Crestron DigitalMedia DM-MD64X64 Operations & Installation Manual Download Page 36

64 x 64 DigitalMedia Switcher 

 

Crestron 

DM-MD64X64 

32  

  DigitalMedia Switcher: DM-MD64X64 

Operations & Installation Guide – DOC. 7318A 

Input Blades 

DigitalMedia input blades for the DM-MD64X64 include the following: 

 

DMB-I-S, 8-channel DigitalMedia 8G fiber input blade (is shown below) 

 

DMB-I-S2, 8-channel DigitalMedia 8G single-mode fiber input blade (refer 
to page 37) 

DMB-I-S 

The DMB-I-S is an input blade that provides eight DM 8G fiber inputs. Each DM 8G 
fiber input enables the connection of a DM 8G fiber transmitter or the output of 
another DM switcher. One multimode fiber optic strand is required per input, each 
supporting distances up to 1000 feet (300 meters) using CresFiber

®

 8G multimode 

fiber optic cable.* 

Specifications 

Specifications for the DMB-I-S are listed in the following table.

 

DMB-I-S Specifications 

SPECIFICATION DETAILS 

Video  
 

Input Signal Type 

DM 8G fiber (DigitalMedia over one 
multimode fiber optic strand)* 

 Formats 

DM 8G with Deep Color & 3D, HDCP 
content protection support 

 Input 

Resolutions 

 

   Progressive 

640 x 480 @ 60 Hz 
720 x 480 @ 60 Hz (480p) 
720 x 576 @ 50 Hz (576p) 
800 x 600 @ 60 Hz 
848 x 480 @ 60 Hz 
852 x 480 @ 60 Hz 
854 x 480 @ 60 Hz 
1024 x 768 @ 60 Hz 
1024 x 852 @ 60 Hz 
1024 x 1024 @ 60 Hz 
1280 x 720 @ 50 Hz (720p50) 
1280 x 720 @ 60 Hz (720p60) 
1280 x 768 @ 60 Hz 
1280 x 800 @ 60 Hz 
1280 x 960 @ 60 Hz 
1280 x 1024 @ 60 Hz 
1360 x 768 @ 60 Hz 
1365 x 1024 @ 60 Hz 
1366 x 768 @ 60 Hz 
1400 x 1050 @ 60 Hz 
1440 x 900 @ 60 Hz 
1600 x 900 @ 60 Hz 
1600 x 1200 @ 60 Hz 
1680 x 1050 @ 60 Hz 

(Continued on following page) 

 

*  The maximum DigitalMedia 8G fiber (DM 8G fiber) cable length is 1000 feet (300 meters) using 

CRESFIBER8G fiber optic cable, or 500 feet (150 meters) using standard CRESFIBER,  
CRESFIBER-SINGLE-SC, or third-party OM3 simplex multimode fiber optic cable.  

Summary of Contents for DigitalMedia DM-MD64X64





























































Reviews:

No comments