background image

Crestron 

CPC-2000A

 

Touchpanel with Dual Joysticks

 

Reserved Join Numbers for the CPC-2000A 

JOIN NUMBER

FUNCTION

VALUE

1016

Backlight

Off

1017

Brightness

Low

1018

Brightness

Medium

1019

Brightness

High

1035

Call up Setup Menu

N/A

 

Sample Program 

NOTE:  

Rather than presenting an illustrative example with SIMPL Window screen 

shots in this documentation, please refer to the zipped file available from the 
Crestron website.  

Due to the unique combination of a user interface and additional network device 
properties of the CPC-2000, a complete sample program is available from the 
Downloads page (EXAMPLES Library) on the Crestron website 
(

www.crestron.com)

. The file CPC2000A.ZIP contains the VT Pro-e touchpanel 

files, SIMPL Windows files, and all supporting files such as macros. There is also a 
text file that explains all that is to be known about the sample programs provided.  

The program works in conjunction with selected CPC-CAMIs in a sample 
application where the CPC-2000A controls the pan/tilt head and a lens with 
focus/zoom capabilities. The application provides 16 presets that store the 
pan/tilt/focus/zoom positions. Via the sample program, the speed of the 
pan/tilt/focus/zoom axes are finely controlled by the sensitivity adjustment knobs of 
the CPC-2000A. Turning the knob counterclockwise decreases the speed of axis 
movement. To increase the speed, turn the knob clockwise. If the knob is turned 
counterclockwise to a stop, the axis does not move.  

A page from a touchpanel project in VT Pro-e is also provided to allow an operator 
to set up the camera and flip any of the axes. Sometimes when a system is installed, 
an axis may appear backwards (i.e., the camera tilts up when it should tilt down). 
This project page provides easy setup without having to change wiring or modify the 
program. The flip states are preserved through power downs of the system. This 
project page is accessed by touching and holding the upper left camera icon for five 
seconds. A brightness and contrast control page for the touchpanel component of the 
CPC-2000A is accessed by touching the upper right camera icon.  

Problem Solving 

Troubleshooting 

The table below and on the next page provides corrective action for possible trouble 
situations, If further assistance is required, please contact a Crestron customer 
service representative.  

Operations Guide - DOC. 5801A 

Touchpanel with Dual Joysticks: CPC-2000A  

  11 

Summary of Contents for CPC-2000A

























Reviews: