Crestron
CNXTA
CNX Telephone Audio Interface Card
To Record a WAV File Message
NOTE:
To record a WAV file, the PC must be equipped with audio capabilities
with a microphone-input jack, a microphone, and multimedia speakers.
NOTE:
The maximum time length of any individual WAV file message is
approximately four (4) minutes. However, the CNXTA may be programmed to play
multiple files consecutively for longer messages.
NOTE:
Although there are alternative methods for selecting the commands of the
application, the following procedure uses the PC mouse and pull-down Menu Bar.
To record a WAV file message, perform the following procedure:
1. At the Windows taskbar, select
Start | Programs | Accessories
. For
Windows 95/NT, select
Multimedia
, for Windows 98, select
Entertainment
. Select
Sound Recorder
and the Sound Recorder
opens as shown below.
Open Sound Recorder
2. Select
File | New
as shown below.
Create New File to Record
3. Click on the
button to begin recording and the
button to
stop recording.
4. Proceed to “Set WAV File or Message Properties, Save, and Exit” on
page 11. To record another file, follow that procedure to step 9.
Operations & Installation Guide - DOC. 8144A
CNX Telephone Audio Interface Card: CNXTA
•
7
Summary of Contents for CNXTA
Page 1: ...Crestron CNXTA CNX Telephone Audio Interface Card Operations Installation Guide ...
Page 2: ......
Page 4: ......
