Wireless RF Receiver
Crestron
CNRFGWA
2
•
Wireless RF Receiver: CNRFGWA
Operations Guide - DOC. 8086A
Specifications
The table below is a summary of specifications for the CNRFGWA.
Specifications of the CNRFGWA
SPECIFICATION DETAILS
Power Requirements
3 Watts (0.125A @ 24VDC)
Communications
One-way high frequency RF (433.92 or 418 MHz)
Operating Range
Up to 300 feet
1
Default Net ID
24
Control System Update Files
2, 3, 4
2-Series Control System
CEN/CN-TVAV
CNMSX-AV/PRO
CNRACKX/-DP
ST-CP
Version C2-2.000.CUZ or later
Version 5.10.13V.UPZ or later
Version 5.01.35X.UPZ or later
Version 5.01.35W.UPZ or later
Version 4.02.04S.UPZ or later
Dimensions
Width: 3.25 in (8.25 cm)
Height: 7.28 in (18.49 cm)
Depth: 1.3 in (3.44 cm)
Antenna length: 7.92 in (20.12 cm)
Weight
1.1 lb (0.5 kg)
1
The location of the CNRFGWA and the orientation of the antenna are important factors in the RF
performance. With the unit located outside of any metal enclosures, the antenna is adjusted to
achieve the best range. The range is dependent on its placement and the building in which it is used.
The construction of the building, obstructions, and RF interference from other devices are factors
determining the effective range of the unit.
2
The latest versions can be obtained from the Downloads | Software Updates section of the Crestron
website (www.crestron.com). Refer to NOTE after last footnote.
3
Crestron 2-Series control systems include the AV2, AV2 with Card Cage, CP2, CP2E, PAC2,
MC2W, MC2E, MP2, MP2E, PRO2, and RACK2.
4
Filenames for CNX and ST-CP update files have a UPZ extension. Files on the website may be .zip
or self-extracting .exe files containing the .cuz or .upz file. To avoid program problems, make sure
you are using the update file with the correct suffix letter (e.g., S, V, W, X).
NOTE
: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
The CNRFGWA, shown on the next page, is housed in a black enclosure with
labeling on the front panel. Three light-emitting diodes (LEDs) on the front of the
unit indicate the unit’s operating status. The RF antenna is attached via the BNC
connector on the top of the unit; a four-pin connector is provided on the bottom panel
for connection to other Cresnet devices. Two miniature rotary switches on the
bottom panel are used to set the unit’s network ID. Four rubber feet on the back of
the unit prevent slippage when the unit is placed in its usual operating position.
Summary of Contents for CNRFGWA
Page 1: ...Crestron CNRFGWA Wireless RF Receiver Operations Guide ...
Page 4: ......
