Crestron
CNLDAB-4A
4-Channel Fluorescent Dimmer Module
120 VAC OR 277 VAC
CIRCUIT BREAKER
ADVANCE
MARK VII
120V OR 277V
BALLAST
NEUTRAL
GRY (TO G)
VIO
(TO OUTPUTS 1, 2, 3, OR 4)
LOW VOLTAGE CLASS 2 WIRING
(REFER TO ADVANCE BALLAST DATA SHEET FOR DETAILS)
TO CRESNET SYSTEM
(REFER TO LATEST NETWORK
INTERCONNECT DRAWING DOC. 5411)
CRESNET COLORS:
24:
RED
Y:
WHITE
Z:
BLUE
G:
BLACK
MAXIMUM LOAD PER CIRCUIT: 16 AMPS
MODULE REQUIRES ONE SPACE IN A CSTC-SERIES CABINET
MODULE REQUIRES TWO SPACES IN A CLC-SERIES CABINET
NOTE: THIS PRODUCT CAN ALSO BE USED FOR SWITCHING NON-DIMMABLE BALLASTS ON AND OFF.
HOWEVER, NOTE THAT THIS PRODUCT USES ELECTRO-MECHANICAL RELAYS FOR SWITCHING
THE AC POWER TO THE LOADS, AND CERTAIN ELCTRONIC BALLASTS HAVE VERY HIGH INRUSH
CURRENTS WHICH MAKE THEM INCOMPATIBLE WITH ELECTRO-MECHANICAL RELAYS. CHECK
WITH BALLAST MANUFACTURER FOR COMPATIBILITY.
This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.
(E103692)
Crestron Electronics, Inc.
DOC. 5661A
15 Volvo Drive, Rockleigh, NJ 07647
(2009617)
Tel: 888.CRESTRON
06.06
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.