CLW-SW1, SWS1, & SLVS1(W/A/B)
Appendix: Wiring Diagrams
Following are wiring diagrams for circuits that may be found when installing a switch:
Stand-Alone Installations
Figure 1: Wiring a CLW-SW(S)1
To continue a circuit past a switched light fixture to one or more duplex receptacles, connect the switch as shown in the
following diagram.
Figure 2: Adding a Duplex Receptacle Past a Switched Light Fixture
Master-Slave Installation
Figure 3: Wiring a CLW-SW1 with a CLW-SLVS1
8
•
Stand Alone Wall Box Dimmer: CLW-SW1, SWS1, & SLVS1
Installation Guide – DOC. 6251A