Crestron
Thermostat
Quick Start Guide
Thermostat Quick Start Guide – Doc. 6145A
CHV-TSAT and CHV-THSTAT Series
•
Crestron Quick Start Thermostat
CHV-TSTAT and CHV-THSTAT Series
Step 2
Thermostat System Connections
Mounting
Screws
(not provided)
Wall Anchors
(not provided)
Backplate
Panhead
6/32 x 1 in
Single-gang
electrical box
(not provided)
Stud
Step 1
Thermostat Mounting
Backplate
For Additional details, refer to the latest version of
the Operations and Installation Guide, Doc. 8163
TOP
HU
M
RHU
RS
R
RS
R
RS
1
RS
2
24(C
)
24(
R)
24V
Y
Z
G
NETWORK
RH
RC
G
Y/
Y1
Y2
O
B
W/
W
1
W2
Backplate
24(R)
- 24 VAC reference terminal. Can be connected to RH or RC
by P4 jumper setting (refer to following page), or tied directly
to power source
24(C)
- 24 VAC common terminal supplies remote 24 VAC power
to thermostat
RS2
- Remote Sensor terminal - Connect the sensor from RS2 to RSR
RS1
- Remote Sensor terminal - Connect the sensor from RS1 to RSR
RSR
- Remote Sensor Returns - Common sensor terminal
RHU
- Reference for humidifier
HUM
- Energized (connected) to RHU during humidity call
W2
- Heat (stage two), energized (connected) to RH during a call for
second stage heat in heat/cool systems
W/W1
- Heat (single stage)/heat (stage one) energized
to RH during a call for heat in heat/cool systems or aux heat
in heat pump systems
B
- Energized to RC during non-cooling modes
O
- Changeover control, energized to RC during cooling modes
Y2
- Compressor (stage two), energized to RC on two-stage
systems on call for second stage
Y/Y1
- Compressor (stage one), energized to RC when
compressor (or first stage) is run
G
- Fan, energized to RC during call for fan
RC
- Reference Cool, used for calls to cooling system
RH
- Reference Heat, used for calls to heating system
Network Connection
for Crestron
Installer Only
NOTE:
Fill the Electrical Box
with Thermal
Insulation Material
1
