Crestron CEN-SW-POE-5, Installation Manual

Page: 13 / 24

Crestron CEN-SW-POE-5 5-Port PoE Switch
Setup
Network Wiring
When wiring the Ethernet network, use Category 5/Category 6
(CAT5/CAT6) wiring. CAT5/CAT6 wiring is a twisted pair cable
designed for Ethernet networks. These networks operate at speeds of up
to 1000 megabits per second (Mbps) using the 1000BASE-T standard.
For information on connecting Ethernet devices in a Crestron system,
refer to the latest version of the Crestron e-Control

Reference Guide
(Doc. 6052), which is available for download from the Crestron Web site
(
www.crestron.com/manuals ).
Supplied Hardware
The hardware supplied with the CEN-SW-POE-5 is listed in the
following table.
Supplied Hardware for the CEN-SW-POE-5
DESCRIPTION PART NUMBER QUANTITY
48 V, 1.25 A 100-240 Vac
Switching Power Supply 2021168 1
North American IEC Power
Cable 2021169 1
5 x 20 ISO, Pan Head
Phillips Rack Screws with
Washers 2021170 2
3/16 x 1-1/4” Pan Head
Phillips Drywall Screws 2021171 4
Installation Guide – DOC. 7524A 5-Port PoE Switch: CEN-SW-POE-5

9