Crestron CEN-RGBHV Page 52 Operation Manual Download

Page: 52 / 56

Wideband RGB Matrix Switcher

Crestron

CEN-RGBHV

Sync Mode

To enter

SYNC

mode, press the

SYNC

button. The display will show the “Sync

Mode” screen.

“Sync Mode” Screen

Sync Mode
Press input

To view the horizontal and vertical sync rates of any input, press the numbered

button for the input you wish to view. The display will show the horizontal and
vertical sync rates for that input.

For example, to view the sync rates for input number

, press the

button below

on the front panel. The LED above

IN 1

will light and the sync rates for input

number 1 will be displayed.

Sync Screen (Showing Horizontal and Vertical Sync Rates for Input 1)

1HSync 63897Hz
1VSync 60Hz

To refresh the current rate, press the numbered

button below the selected input

again. A displayed sync rate of 0 Hz, indicates that no sync has been detected.

To view the sync rates for a different input, press the numbered

button for the

input you wish to view.

To exit

SYNC

mode, press the

SYNC

button or press another button such as

VIEW

MENU

•

Wideband RGB Matrix Switcher: CEN-RGBHV

Operations Guide – DOC. 6612C

Summary of Contents for CEN-RGBHV

























































Search results

Summary of Contents for CEN-RGBHV

Reviews:

Related manuals for CEN-RGBHV

Brands by name

Popular brands

Crestron CEN-RGBHV, Operation Manual

Search results

Summary of Contents for CEN-RGBHV

Reviews:

Related manuals for CEN-RGBHV

Brands by name

Popular brands