Crestron
CEN-NVS200
Network Video Streamer
NOTE:
As mentioned in the previous paragraphs,
Save
must be clicked in order
to save the
Patrol selection and Dwelling time
settings. If
Save
is not clicked, the
Patrol selection
and
Dwelling time
settings do not take effect.
•
Preset position name:
In the text entry box, enter a short name for the
current video view, and the click
Add
.
NOTE:
Entering a very long preset position name causes problems with
the positioning of the camera.
•
Preset Position:
Provides a list of preset positions:
To move the camera to a certain preset position, select the desired
position from the drop-down list and then click
Go to
.
⇒
⇒
To delete a certain preset position, select the desired position from the
drop-down list and then click
Delete
.
Setting Custom Commands
Set custom commands by pressing the
Custom Command
button on the “Camera
Control” configuration page. The “Custom Command” configuration page will open.
NOTE:
Up to five custom commands can be set.
NOTE:
If you selected
Custom camera
as the PTZ driver on the “Camera Control”
configuration page, you must configure pan, tilt, zoom and focus functions by setting
custom commands.
“Custom Command” Page (Not Applicable to Custom Camera)
Operations & Installation Guide – DOC. 7111A
Network Video Streamer: CEN-NVS200
•
59
