Crestron
CEN-NVS200
Network Video Streamer
To preview the image with change(s) before saving the change(s), click
Preview
.
To recall the previous settings without saving the current settings, click
Restore
.
To save the change(s), click
Save
.
To close the page, click
Close
.
Configuring Privacy Mask
Settings
Configure privacy mask settings by pressing the
Privacy Mask
button in the
Video
Settings
pane of the “Audio and Video” configuration page. The “Privacy Mask”
configuration page will open.
“Privacy Mask” Configuration Page
NOTE:
The “Privacy Mask” configuration page can also be accessed by entering
the following URL in your Web browser:
http://
Video Streamer
/setup/privacy.html
Video Streamer
is the host name or IP address of the CEN-NVS200.
1. Select
the
Enable privacy mask
checkbox to enable privacy mask
window(s). A privacy mask window blocks viewing of an area on the video
output as determined by the privacy mask window settings.
NOTE:
Up to five privacy mask windows can be created.
2. Click
New
. A privacy mask window will open:
•
To adjust the size of the window, drag the top, bottom, left, and right
edges of the window frame as desired. The
X, Y, Width
and
Height
values automatically change as appropriate.
•
To move the window to block video in a desired location, click the title
bar and drag the window to the desired location. The
X
and
Y
values
automatically change as appropriate.
•
To delete the window, click
X
in the upper right corner of the window.
3. In
the
Window Name
text entry box, enter a name for the privacy mask
window. The name is displayed in the title bar of the window.
4. Click
Save
to save the changes. The privacy mask appears in the video
window as shown in the following illustration.
Operations & Installation Guide – DOC. 7111A
Network Video Streamer: CEN-NVS200
•
49
