IR Gateway
Crestron
C2N-IRGW-1G & C2N-IRGW-F
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at
First-time users will need to establish a user account.
Earliest Version Software Requirements for the PC
NOTE:
Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
Crestron has developed an assortment of Windows
-based software tools to develop
a Cresnet system. The following are the minimum recommended software versions
for the PC:
Software
TASK
REQUIRED SOFTWARE VERSION
Program control system to
operate C2N-IRGW-1G or
C2N-IRGW-F.
SIMPL Windows version 2.07.24 or later
with SIMPL+
®
Cross Compiler version 1.1
or later and Library update 454 or later;
Also requires Crestron Database version
18.1.4 or later.
Upload program and firmware.
Crestron Toolbox 1.04.16 or later.
Program with simple wizards for
systems using a C2N-IRGW-1G
or C2N-IRGW-F
(optional but recommended).
Crestron D3 Pro™ version 2.1.7 or later
with D3 Pro Templates version 2.0.1 or
later or SystemBuilder™ version 2.0.6 or
later with SystemBuilder Templates version
2.0.3 or later. Refer to software release
notes or Crestron website for other required
Crestron software packages.
Programming with Crestron D3 Pro or
SystemBuilder
Crestron D3 Pro or SystemBuilder is the easiest method of programming, but does
not offer as much flexibility as SIMPL Windows. For additional details, download
D3 Pro or SystemBuilder from the Crestron website and examine the extensive help
files.
14
•
IR Gateway: C2N-IRGW-1G & C2N-IRGW-F
Operations & Installation Guide – DOC. 6468A
