Wall Mount LCD Controller
Crestron
APAD
True-Feedback
Simplified connectivity using the Crestron
®
4-wire Cresnet control bus makes
installation a breeze. Fully bidirectional communications enables true-feedback for
display of current status of audio, lighting, or climate control settings.
Versatile Mounting Options
Several mounting options are available for the APAD to facilitate a clean, attractive
installation in any wall or similar flat surface.
Specifications
Specifications for the APAD are listed in the following table.
APAD Specifications
SPECIFICATION DETAILS
LCD Display
Display
Type
Size
Resolution
Color
Illumination
Transmissive LCD dot matrix
2.72 in (6.9 cm) wide x 1.44 in (3.7 cm) high
128 x 64 pixels
Monochrome, white on black, invertible
White LED backlit
Controls
Nav
Wheel
Functions
Power
(1) Continuous turn rotary encoder; used to
navigate menu, scroll through lists and adjust
values.
(5) “softkey” pushbuttons, programmable, normally
used to select menu functions. The pushbutton to
the right of the nav wheel is normally used to
execute a selected command.*
(1) pushbutton, programmable, normally used to
execute a power command*
* All pushbuttons translucent, white backlit,
dimmable
Graphics
Monochrome, white on black (invertible), supports
dynamic text and icon graphics
Audio
Built-in speaker (rear) for key click sound
Power Requirements
Cresnet Power Usage
3 Watts (0.125 Amps @ 24 Volts DC)
Default NET ID
2E
Minimum 2-Series
Control System Update
File
3.155.0 or later
Environmental
Temperature
Humidity
32 to 104° F (0 to 40° C)
10% to 90% RH (non-condensing)
Enclosure
Construction
Faceplate
Injection-molded plastic, flush wall-mountable
Injection-molded plastic, white
(Continued on next page)
2
•
Wall Mount LCD Controller: APAD
Operations & Installation Guide – DOC. 6455