96 • AirMedia® Series 3 Receivers
Product Manual — Doc. 9020B
To connect the device to the XiO Cloud service:
1. Record the MAC address and serial number that are labeled on the shipping box or the
device. The MAC address and serial number are required to add the device to the
XiO Cloud service.
NOTE:
If the device has multiple MAC addresses, use the MAC address that is providing
the primary connection back to the network. For most devices, the Ethernet MAC
address should be used. However, if your device is connecting to the network over a
different protocol (such as Wi-Fi® communications), use the MAC address for that
protocol instead.
2. Log in to your XiO Cloud account at
3. Claim the device to the XiO Cloud service as described in the
.
Select the device from the cloud interface to view its status and settings. The device may now
also be managed and assigned to a group or room. For more information, refer to the
NOTE:
For XiO Cloud accounts with room-based licenses, the device must be added to a
licensed room before its status and settings can be viewed.
Crestron Deployment Tool for
PowerShell® Software
Crestron has developed a tool for customers without the ability to use CPS to assist in deploying
multiple devices without the need to configure each device individually. With this tool, an
administrator has the ability to input all of the settings to be configured on multiple receivers,
and then use PowerShell® task-based command-line shell and scripting language to configure
the devices across a local network.
