manualshive.com logo in svg

Crestron 4K DigitalMedia 8G+ DM-RX-4K-202-C, Supplemental Manual, Page: 5 / 20

Share
Download
Crestron 4K DigitalMedia 8G+ DM-RX-4K-202-C Supplemental Manual Download Page 5

Supplemental Guide — Doc. 7932B

DM-TX-4K-202-C and DM-TX-4K-302-C • 1

Introduction

The Crestron® DM-TX-4K-202-C and DM-TX-4K-302-C are DigitalMedia 8G+®
transmitters and switchers that provide support for the transport of 4K and Ultra HD
video signals. The DM-TX-4KZ-202-CDM-TX-4K-202-C and DM-TX-4K-302-C provide two
HDMI® inputs. In addition to the HDMI inputs, the DM-TX-4K-302-C provides one VGA
input and one analog audio input. The DM-TX-4K-202-C and DM-TX-4K-302-C also
function as control modules, providing RS-232 and IR control ports. An Ethernet port and a
USB HID port are also provided.

This guide provides information about the following:

l

Physical description of the side views of the DM-TX-4K-202-C and DM-TX-4K-302-C

l

Configuration of some of the capabilities of the DM-TX-4K-202-C and
DM-TX-4K-302-C, for example, automatic audio/video signal format management
via EDID

l

HDCP 2.2. compliance

l

Troubleshooting

l

Pin assignments

For installation information, refer to the DM-TX-4K-202-C and DM-TX-4K-302-C Quick
Start Guide (Doc. 7743) at

www.crestron.com/manuals

.

Summary of Contents for 4K DigitalMedia 8G+ DM-RX-4K-202-C





















Reviews:

No comments