Product Manual — Doc. 9094B
ZUM-HUB4 • 53
Assign a Floor ID to an RAP
Assigning a Floor ID to a load controller adds a floor to the Floor list. The Floor ID drop-down
menu options are numbers -40 to + 200 and Disabled. The Floor ID can be negative to indicate a
floor below ground or positive to indicate a level above ground. Disabled categorizes the load
controller to Unassigned Floor.
Assign a Zone ID to an RAP
To designate different areas of a floor as a zone, assign a load controller a Zone ID. The Zone ID
drop-down menu options are letter groupings AA to AZ and BA to BF.
Remove a RAP
To delete a load controller, click
. A confirmation window opens. Click Yes to delete the load
controller, or No to keep the load controller.
Review RAP Components
Click
next to a load controller to view connected devices.
l
Device: Displays child devices connected to the parent load controller.
l
Status: Displays Online or Offline to show the child device's status.
l
Cresnet ID: Displays the child device's Cresnet® control network ID.
l
Serial Number: Displays the child device's serial number.
l
Version: Displays the child device's current firmware version.
