Crestron Electronics TS-1070, Product Manual, Page: 86 / 166

82 • TS-70 Series Product Manual — Doc. 8555E
Local Configuration
Refer to the following sections for information about configuring the device locally using its
built-in setup screens.
Access the Setup Screens
The setup screens enable basic configuration prior to regular operation of the touch screen.
To access the touch screen's built-in setup screens during regular operation, place five fingers on
the display and hold for 15 seconds.
The main Setup screen is displayed (TS-1070 shown).
TS-1070 Setup Screen
The Setup screen shows the IP address and hostname of the touch screen and provides the
following configuration selections:
l
Buttons for Ethernet setup, IP table setup, audio setup, display setup, standby timeouts,
application selection, Wi-Fi® network setup, diagnostics, Bluetooth® beacon configuration,
and the virtual toolbar (model dependent).
l
A button to toggle system messages on or off
l
An About button that provides information about the touch screen.