DMS-R-IM
Operation
April 7, 2021
Digital Modular System - Rinse
4-21
4.8
Operating Station (Rinse Station)
4.8.1
Rinse Station Process Parameters Setup
NOTE
Please refer to
section 5 Interpreting HMI
for more detail
description of each parameter.
NOTE
Before operate this station, ensure “Local” mode is selected in
Misc. screen.
Step 1: Login as Maintenance/Engineer.
Step 2: Go to touch screen. At Main Menu screen, press
[Miscellaneous Parameters.] button to go to Misc. 1 screen.
Under
Mode Selection
box, ensure the button caption
appears as “LOCAL”. Otherwise, press the button again.
NOTE
“
*OPTIONAL
” wording will be displayed on the touch
screen when the particular option is not purchased by user or
the option is not enabled in the Setup 6 screen.
Note
: User can enable/disable options if applicable in the
Setup 6 screen by access level as Administrator.
NOTE
Make sure front and rear panels are closed properly and
[EMO]
button is released before press [SYSTEM ON] button
at touch screen.
Follow instruction below to perform process parameters setup if necessary.
Step
Description
Images illustration
1
Login as Engineer. Refer section
for procedure.
