DMS-R-IM
Operation
April 7, 2021
Digital Modular System - Rinse
4-18
4.7
Temperature Monitoring and Setting
NOTE
When auto mode process is running, user is allowed to
change the temperature setting, but the changes only take
place after current process is completed.
After tank is filled with cleaning liquid and heater has been turned on, monitor
tank temperature and wait for the tank to reach operating temperature. Tank
temperature can be read from Auto Screen and Temperature Control screen.
Figure 4-5: Auto Screen (DMS-1218 & DMS-1826)
Figure 4-6: Temperature Control screen (DMS-1218 & DMS-1826)
To perform setting for temperature low, upper limit and set point, please refer
to
section 4.7.1 View and Change Tank Temperature Settings.
.
Station
Temperature
Station
Temperature
