DMS-R-IM
Operation
April 7, 2021
Digital Modular System - Rinse
4-4
4.3
Power ON System
NOTE
Make sure front and rear panels are closed properly and
[EMO]
button is released before press [SYSTEM ON] button
at touch screen.
Figure 4-1: Main control panel at electrical box
Step
Description
Images illustration
1
Open electrical panel door. Ensure
that all Main Circuit Breakers
(MCB) are switch to
ON
.
N/A
2
Check front and rear panels.
Ensure the front and rear panels
are closed properly before
powering ON.
N/A
3
Power
ON
the system by turning
the
Main Disconnect
switch to
position “1” (ON).
The station touch screen monitor
will turn
ON.
Main Disconnect
Touch Screen
Cycle Start
EMO
