DMS-R-IM
Appendix
April 7, 2021
Digital Modular System - Rinse
9-18
Step
Description
3
Press navigation buttons on the panel to configure the meter:
Select Resistivity sensor with the corresponding unit/title (Ohm
for Resistivity measuring).
Set resistivity lower scale and upper scale according to
conductivity
meter loop range for 4-20mA.
For example, if lower scale is 0 MOhm, then set 4mA
SETPNT
to
0; if upper scale is 18.2 MOhm, set 20mA
SETPNT
to 18.2.
(Refer to
Georg Fisher, Signet 9900 Transmitter
literature for detail
operating description)
4
The meter displays the scale, real time resistivity reading and unit on
the display panel when it is activated.
Note
: “Optional item” (Only applicable when this feature is purchased)
