5925 Heisley Road • Mentor, OH 44060-1833
Holding Cabinet
FL-2331-DOM
Rev. 10 (12/11)
Page 2 of 8
ELECTRICAL SPECIFICATIONS:
Model No.
Volts
Watts
Amps
Hertz
Phase
NEMA
H138NPSCDOM2
120
1400
11.7
60
1
5-15P
H138NPSCDOM3
120
2000
16.6
60
1
5-20P
Note:
The above model numbers are basic models. They may be followed by letters:
GA
,
L, R, 2M, D,
or ending with
S.
INSTALLATION:
1. Remove all paper and packing material from
inside of cabinet.
2. Remove protective paper and vinyl material from
outside surfaces of cabinet.
3. Place the cabinet in a well-ventilated area.
4. Place cabinet on level floor.
5. Plug cord end into proper wall outlet.
FIRST TIME START-UP:
1. Push the POWER switch to “ON”, and run the
unit for one hour.
NOTE:
DO NOT PUT FOOD INTO CABINET!
This step is to burn off manufacturing oils and excess
adhesive.
2. Let the cabinet cool and wipe inside clean with
detergent and hot water before first use.
Blower inlet guard must be in place before
operating cabinet.
WARNING
OPERATING and MAINTENANCE INSTRUCTIONS
Models: H138NPSCDOM Series Hot Cabinet
HOW TO HOLD:
1. Push POWER switch to “ON.” POWER LIGHT
will come on.
2. The control is preset to maintain an average of
180°F. Displayed temperatures will change during
loading and unloading of product
3. Put product into cabinet.
NOTE:
Proper food holding temperature is
140°F/60°C or higher.
WARNING
Air is
VERY HOT
when door is opened.
TEMPERATURE
CONTROL
POWER
LIGHT
POWER
SWITCH
ADJUST
BUTTONS
"SET" BUTTON
TEMPERATURE
DISPLAY
ADJUST
°F
SET