Creo Trendsetter 3244+ AL, Operator'S Manual

Page: 125 / 134

EMI/EMC Compliance 111
EMI/EMC Compliance
The Trendsetter 3244+ AL has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the Trendsetter is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with this manual, may cause
harmful interference to radio communications. Operation of the
Trendsetter in a residential area is likely to cause harmful interference. You
will be required to correct the interference at your own expense.
The FCC Certification label on the output device indicates compliance
with these limits. See
Appendix B, Labels for an illustration of this label.
The Trendsetter 3244+ AL has been designed, tested, and evaluated for
compliance with the EMC Directive 89/366/EEC. It complies with the
following EMC standards:
•
EN 55022 / CISPR-22, Class A
•
EN 50082-2
Noise Emissions
The Trendsetter 3244+ AL has been designed, tested, and evaluated for
compliance with the maximum noise emission limit permitted for an
office environment, 70 dB(A).